High and new technology enterprises

China National Accreditation Service for Conformity Assessment LABORATORYACCREDITATION CERTIFICATE

Product Details
PVC-U Insulating Electrical Pipes
Detailed
I. Introduction
        PVC-U building insulation casing is PVC-U resin as the main raw material, adding various stabilizers, anti-aging agent, impact agents and other additives made by extrusion and molding of various models of hard PVC pipe.
        Second, the application field
        1, power
        2, telecommunications line jacket
        3, embedded wall construction, underground cables, etc.
        Third, the product characteristics
        1, compression: electrical casing wall thickness 1.6mm I produced in more than able to withstand more than 750N pressure, it can also be surface mounted laid in concrete without pressure and sabotage;
        2, impact, heat: electrical conduit in concrete pouring process, subject to normal tamping impact will not break, and by the heat of condensation in the construction process, the same soft;
        3, moisture acid: PVC electrical conduit acid proof performance, will not rust, all the required connections with PVC adhesive bonding, infiltrated the inner tube waterproof, moisture better, so in corrosive environments conducive to the use;
        4, fire retardant: PVC electrical conduit from the fire self-extinguishing (leave the flame that will self-extinguish within 30 seconds), the flame will not spread along the pipeline;
        5. Insulation: PVC electrical conduit has excellent insulation properties, in the flooded state AC2000 volt, 50HZ not breakdown. To prevent accidental electrocution, the international community tends to be better insulated than the ground, Lu Yu-brand PVC electrical conduit is to meet this requirement;
        6, pest control mice: PVC electrical conduit due to special additives have been added, does not emit odors and attract vermin biting damage;
        7, the construction is convenient: 32mm or less portable electrical conduit can be cut off with a tubing cutter, insert the appropriate special spring in conduit, at room temperature, can be bent into the desired artificial angle with PVC adhesive can quickly and easily Conduit pipe connected into a desired shape.
        Fourth, product specifications
        Executive Standard: JG3050-1998 Unit: mm


        Telecom casing pipe specification Unit: mm
        Fifth, construction methods
        PVC-U insulated flame retardant electrical conduit, pipe fittings using PVC adhesive glue connected, specific instructions are as follows:
        1. Cut the pipe: Use scissors or owned hacksaw cut the PVC conduit to use the desired length, the cut should be smooth, used scissors back chamfering.
        2, pipe and pipe fittings Connection: keep the adhesive surface clean before connection. In the outer surface of the pipe insertion end and fittings inside the socket surface evenly coated with adhesive, after about one minute to force the tube inserted into the inner pipe is fixed, 10 minutes stereotypes.
        3, pipe bending: bending spring with the corresponding specifications provided by the factory, insert the tube, can be bent, the following points should be noted that when the elbow:
        (1) shall be provided with the appropriate size of the factory springs, and can not be confused with standard models, otherwise it will cause damage to the springs and pipes;
        (2) the time required to bend slowly, otherwise easily damaged pipe and spring;
        (3) is not removed before the spring, so do not force retraction elbow, to prevent damage to the spring;
        (4) When the spring is not easy to remove, pull the side edge counter-clockwise rotation of the spring, spring diameter contraction, can be removed;
        (5) construction below 0 ℃ weather, usable cloth tube bends require repeated friction to heat up and then bend it properly.
        Shipments of goods priced according to the size of the power meeting, planned product Shandong Foreign customers vehicles (commonly used models) company with inventory, are in stock, money to be arranged within two to three days delivery, Shandong province this invention to customer vehicles, After the factory by 50 km / h control the arrival time; order products (very used models) the company does not have inventory, large production according to customer request, is required to pay 20% deposit, delivery time and circumstances of the production line scheduling, Please call customer service to understand the situation beforehand.

        Transportation: Round trip vehicle shipped in large quantities by small quantities go picking station, the specific equipment and freight shipments that require immediate communication and logistics confirmation.

WORKSHOP